If device asks for a password during the connection – enter «12345678» and press «OK».Įxample of telescope configuration and management with use of SkySafari software: Then turn on your mobile device Wi-Fi mode and connect to the access point with SSID – «ServoFi». Spend a standard setting procedure recommended by the manufacturer of the telescope, namely enter into the remote location coordinates of observation, the current time and make alignment the telescope at the stars.
#Interface skysafari plus for android with stellarcat serial#
Connect ServoFi WiFi adapter to RS-232 serial port and to the 5 – 15 V power supply source (before turning on the power of the telescope).The WiFi module works as an access point and can be used to connect all your astro devices to a single network!Īlso, the WiFi adapter can operate in local station mode. Important: ServoFi requires an external power supply of 5 – 15 V! It is possible to supply from the telescope power supply through the power splitter. HW Virtual Serial Port software creates a TCP-COM bridge allow Windows based astronomical aplications comunicate throught WIFi moduls. To use the adapter on a PC, you must create a TCP-COM port bridge. The WiFi module settings are made from the WEB interface. Also works with the SkySafari, Orion StarSeek 4 4.4.4 application for mobile devices. It can be used for a rapid telescope targeting with help of mobile devices such as smartphones or tablets. This WiFi adapter provides full wireless control of the telescope mount from a laptop or PC. ServoFi is a wireless adapter for telescope control systems on which the ServoCAT control system installed.
0 kommentar(er)
